本页源码来自 TradingView 公开发布的开源脚本,版权归原作者所有, 请遵循其原始许可(Pine 脚本常见 CC BY-NC-SA / MPL-2.0 / MIT)。 本项目仅用于研究检索与许可范围内的移植。
//@version=6
indicator("Fractal Bias H1/M15 + M5 Sweep Alerts", overlay = true, dynamic_requests = true)
bool alertShorts = input.bool(true, "Short-Vorbereitung melden", group = "M5-Sweep-Alarme")
bool alertLongs = input.bool(true, "Long-Vorbereitung melden", group = "M5-Sweep-Alarme")
// Fuer normale, zeitbasierte Kerzencharts.
// 1 = Long, -1 = Short, 0 = kein Bruch in der verfuegbaren Historie.
// Neue, ungebrochene Fraktale setzen die gespeicherte Richtung NICHT zurueck.
f_bias() =>
var float upper = na
var float lower = na
var int direction = 0
// Strikte 5er-Fraktale: zwei niedrigere Hochs / hoehere Tiefs je Seite.
bool upFractal = high[2] > high[4] and high[2] > high[3] and high[2] > high[1] and high[2] > high
bool downFractal = low[2] < low[4] and low[2] < low[3] and low[2] < low[1] and low[2] < low
if upFractal
upper := high[2]
if downFractal
lower := low[2]
// Dochte und Schlusskurse exakt auf dem Level reichen nicht aus.
// Verbrauchte Levels entfernen, damit nur neue Brueche zaehlen.
if not na(upper) and close > upper
direction := 1
upper := na
if not na(lower) and close < lower
direction := -1
lower := na
direction
f_snapshot() =>
int direction = f_bias()
[direction, direction[1]]
f_readBias(string targetTf) =>
var int result = 0
if timeframe.in_seconds() < timeframe.in_seconds(targetTf)
// Bestaetigter HTF-Wert ab Beginn der naechsten Zielkerze.
result := nz(request.security(syminfo.tickerid, targetTf, f_bias()[1], lookahead = barmerge.lookahead_on, calc_bars_count = 100000), 0)
else if timeframe.in_seconds() == timeframe.in_seconds(targetTf)
// Historie auch hier separat anfordern, unabhaengig vom sichtbaren Ausschnitt.
[current, previous] = request.security(syminfo.tickerid, targetTf, f_snapshot(), lookahead = barmerge.lookahead_off, calc_bars_count = 100000)
result := barstate.isconfirmed ? current : nz(previous, 0)
else
// Auch auf H4, Tageschart usw. alle verfuegbaren Unterkerzen auswerten.
[directions, closingTimes] = request.security_lower_tf(syminfo.tickerid, targetTf, [f_bias(), time_close], calc_bars_count = 100000)
int cutoff = barstate.isrealtime ? timenow : time_close
int i = array.size(directions) - 1
while i >= 0
if array.get(closingTimes, i) <= cutoff
result := array.get(directions, i)
break
i -= 1
result
f_label(int direction) =>
direction == 1 ? "Long" : direction == -1 ? "Short" : "Nicht bestimmbar"
// Laeuft ausschliesslich im M5-Kontext. Ein Sweep ist hier das erste
// strikte Ueber-/Unterschreiten, ohne Rueckkehr- oder Schlusskursbedingung.
f_m5Sweeps() =>
var float upper = na
var float lower = na
var int upperId = na
var int lowerId = na
var int sweptUpperId = na
var int sweptLowerId = na
var float sweptUpperPrice = na
var float sweptLowerPrice = na
// Nur abgeschlossene Kerzen fuer die Fraktalbildung verwenden.
// [3] ist die Mitte; [2] und [1] sind die beiden fertigen rechten Kerzen.
bool confirmedUpper = high[3] > high[5] and high[3] > high[4] and high[3] > high[2] and high[3] > high[1]
bool confirmedLower = low[3] < low[5] and low[3] < low[4] and low[3] < low[2] and low[3] < low[1]
if confirmedUpper
upper := high[3]
upperId := time[3]
if confirmedLower
lower := low[3]
lowerId := time[3]
// high/low der laufenden M5-Kerze: Die Lunte reicht bereits aus.
if not na(upper) and high > upper
sweptUpperId := upperId
sweptUpperPrice := upper
upper := na
if not na(lower) and low < lower
sweptLowerId := lowerId
sweptLowerPrice := lower
lower := na
[sweptUpperId, sweptLowerId, sweptUpperPrice, sweptLowerPrice]
if not chart.is_standard or timeframe.isticks
runtime.error("Bitte einen normalen, zeitbasierten Kerzenchart verwenden.")
int h1 = f_readBias("60")
int m15 = f_readBias("15")
bool ready = h1 != 0 and m15 != 0
bool aligned = ready and h1 == m15
color rowColor = aligned ? color.rgb(27, 135, 65) : color.rgb(190, 45, 45)
// Fuer die Live-Alarme wird bewusst die LAUFENDE M5-Kerze abgefragt.
// Auf groesseren Charts liefert security() live die juengste Unterkerze.
// Historische Alarmmarker werden damit nicht rekonstruiert.
[upperSweepId, lowerSweepId, upperSweepPrice, lowerSweepPrice] = request.security(syminfo.tickerid, "5", f_m5Sweeps(), lookahead = barmerge.lookahead_off, calc_bars_count = 100000)
// varip verhindert Wiederholungen auf weiteren Ticks derselben Chartkerze.
// Beim Start vorhandene Sweeps nicht nachtraeglich melden.
varip bool liveInitialized = false
varip int seenUpperId = na
varip int seenLowerId = na
if barstate.isrealtime
if not liveInitialized
seenUpperId := upperSweepId
seenLowerId := lowerSweepId
liveInitialized := true
else
bool newUpperSweep = not na(upperSweepId) and (na(seenUpperId) or upperSweepId != seenUpperId)
bool newLowerSweep = not na(lowerSweepId) and (na(seenLowerId) or lowerSweepId != seenLowerId)
if newUpperSweep
// Auch ohne passenden Bias verbrauchen: kein spaeter Alarm.
seenUpperId := upperSweepId
if alertShorts and h1 == -1 and m15 == -1
alert(syminfo.ticker + " | SHORT-Vorbereitung: H1 und M15 Short. Oberes M5-Fraktal bei " + str.tostring(upperSweepPrice, format.mintick) + " gesweept. Jetzt auf M1 nach einem Short-Entry suchen.", alert.freq_all)
if newLowerSweep
seenLowerId := lowerSweepId
if alertLongs and h1 == 1 and m15 == 1
alert(syminfo.ticker + " | LONG-Vorbereitung: H1 und M15 Long. Unteres M5-Fraktal bei " + str.tostring(lowerSweepPrice, format.mintick) + " gesweept. Jetzt auf M1 nach einem Long-Entry suchen.", alert.freq_all)
var table panel = table.new(position.top_right, 2, 3, border_width = 1, border_color = color.new(color.white, 60))
if barstate.islast
table.cell(panel, 0, 0, "Zeitrahmen", text_color = color.white, bgcolor = color.rgb(40, 40, 40))
table.cell(panel, 1, 0, "Bias", text_color = color.white, bgcolor = color.rgb(40, 40, 40))
table.cell(panel, 0, 1, "H1", text_color = color.white, bgcolor = rowColor)
table.cell(panel, 1, 1, f_label(h1), text_color = color.white, bgcolor = rowColor)
table.cell(panel, 0, 2, "M15", text_color = color.white, bgcolor = rowColor)
table.cell(panel, 1, 2, f_label(m15), text_color = color.white, bgcolor = rowColor)