本页源码来自 TradingView 公开发布的开源脚本,版权归原作者所有, 请遵循其原始许可(Pine 脚本常见 CC BY-NC-SA / MPL-2.0 / MIT)。 本项目仅用于研究检索与许可范围内的移植。
// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © PlayPlayTrade
//@version=6
// Aftershocks Fault: where a coin held still. Open source.
// Two things on the price chart, both from the Coil's own measurement (pine/aftershocks_coil.pine, docs/coil-spec.md):
// 1. every candle tinted by the Coil of the newest closed hourly candle, grey at 0% and teal at 100%;
// 2. a profile at the right edge: of the last N hourly closes, how many closed in each price row while
// the Coil read the quiet threshold or more. The fullest row is drawn as a dashed line.
// A count of past hours. Not a forecast, and not a price to trade.
//
// The Coil, on 1-hour closes (hourlyCoil() below is aftershocks_coil.pine's, byte for byte):
// bandwidth = (upper - lower) / middle, from 20-candle Bollinger bands at 2.0 population standard deviations
// coil % = 100 x (1 - below / 119), where below counts the last 120 bandwidths (newest included)
// that are strictly narrower than the newest. 100 = the narrowest of the 120.
// request.security calls: 1. tests/test_fault_pine.py asserts the count and the copied function.
indicator("Aftershocks Fault", shorttitle = "Fault", overlay = true, max_bars_back = 200, max_boxes_count = 100, max_lines_count = 1, max_labels_count = 2)
// Fixed to the measured method: these are not inputs, so the reading cannot drift from the card's.
BB_PERIOD = 20
BB_STD_MULTIPLIER = 2.0
LOOKBACK = 120
// Ties must stay ties. The bot's statistics.fmean / pstdev are exact, so two windows holding the same
// closes in a different order give bit-identical bandwidths; Pine's float sums depend on the order and
// can leave one a few 1e-14 below the other, which would count it as lower. Measured on the ten card
// coins' last 3000 hourly candles: float error at most 3.8e-14 (relative), smallest real gap between
// distinct bandwidths 9.9e-8. 1e-10 sits between the two.
TIE_TOLERANCE = 1e-10
// The coil, width and open time of the previous (closed) hourly candle. Runs in the 1-hour context, so every series below is hourly.
hourlyCoil() =>
middle = ta.sma(close, BB_PERIOD)
sd = ta.stdev(close, BB_PERIOD, true) // biased = true: population, divides by N
upper = middle + BB_STD_MULTIPLIER * sd
lower = middle - BB_STD_MULTIPLIER * sd
bw = (upper - lower) / middle
float coil = na
if not na(bw[LOOKBACK - 1])
current = bw
int below = 0
bool complete = true
for j = 0 to LOOKBACK - 1
v = bw[j]
if na(v)
complete := false
break
if v < current * (1.0 - TIE_TOLERANCE) // strictly lower; a tie is not lower
below += 1
if complete
coil := 100.0 * (1.0 - below / (LOOKBACK - 1.0))
widthPct = close != 0 ? 100.0 * (upper - lower) / close : 0.0
[coil[1], widthPct[1], time[1]]
// The newest closed hourly candle's Coil, close and open time. Runs in the 1-hour context.
quietReading() =>
[hourCoil, hourWidth, hourTime] = hourlyCoil()
[hourCoil, close[1], hourTime]
// One request. The [1] inside hourlyCoil() with lookahead_on is the non-repainting form used by
// aftershocks_coil.pine: every chart bar shows the reading of the newest hourly candle that had CLOSED
// when that bar opened, on history and live alike, and the same reading on chart timeframes up to 1h.
[coil, hourClose, hourOpen] = request.security(syminfo.tickerid, "60", quietReading(), lookahead = barmerge.lookahead_on)
// Settings. None of them reaches hourlyCoil(): the Coil itself is fixed.
tintLoud = input.color(#e040fb, "Coil 0%", group = "Candle tint")
tintMid = input.color(#6f7990, "Coil 50%", group = "Candle tint")
tintQuiet = input.color(#0fa394, "Coil 100%", group = "Candle tint")
hoursCounted = input.int(120, "Hours counted", minval = 24, maxval = 2000, group = "Profile")
quietThreshold = input.float(90.0, "Quiet threshold", minval = 0.0, maxval = 100.0, step = 1.0, group = "Profile")
rowCount = input.int(40, "Rows", minval = 2, maxval = 100, group = "Profile")
profileWidth = input.int(30, "Profile width (bars)", minval = 5, maxval = 200, group = "Profile", display = display.none)
PROFILE_GAP = 3 // bars between the last candle and the profile
// One palette: the three tint inputs. tintQuiet also draws the bars, the dashed line and both labels.
// Each default reads at 3:1 or better on both TradingView themes (#131722 and #FFFFFF), and none is
// white, red or green (tests/test_pine_parity.py, PinePaletteTest).
aboveHourly = timeframe.in_seconds() > 3600
if aboveHourly
runtime.error("Aftershocks Fault requires a chart timeframe of 1h or lower.")
// Part 1. Every candle tinted by its Coil on three points: hot violet at 0 (loud), slate at 50, teal at 100 (still).
// Drawn as a candle over the chart's own, so the body, wick and border all take the tint. No reading yet, no
// candle: the chart's own shows.
tint = na(coil) ? color(na) : coil <= 50 ? color.from_gradient(coil, 0, 50, tintLoud, tintMid) : color.from_gradient(coil, 50, 100, tintMid, tintQuiet)
plotcandle(open, high, low, close, title = "Coil tint", color = tint, wickcolor = tint, bordercolor = tint)
// Part 2. The last hoursCounted hourly closes and their Coil, one entry per hour, taken on the first
// chart bar of each hour (so a 5-minute chart adds one hour, not twelve).
var hourCloses = array.new<float>()
var hourCoils = array.new<float>()
firstBarOfHour = na(hourOpen[1]) or hourOpen != hourOpen[1]
if firstBarOfHour and not na(hourClose)
array.push(hourCloses, hourClose)
array.push(hourCoils, coil)
while array.size(hourCloses) > hoursCounted
array.shift(hourCloses)
array.shift(hourCoils)
// Drawn on the last bar only: the old bars, line and label deleted, new ones made. At most 100 boxes.
var profileBoxes = array.new<box>()
var line fullestLine = na
var label fullestLabel = na
var label profileTitle = na
if barstate.islast
for bx in profileBoxes
box.delete(bx)
array.clear(profileBoxes)
line.delete(fullestLine)
label.delete(fullestLabel)
label.delete(profileTitle)
counted = array.size(hourCloses)
if counted > 0
// Equal rows between the lowest and highest close of the window; each quiet close adds one to its row,
// and the row remembers the newest hour (its index in the window) that added one.
windowLow = array.min(hourCloses)
windowHigh = array.max(hourCloses)
rowHeight = (windowHigh - windowLow) / rowCount
rowCounts = array.new<int>(rowCount, 0)
rowNewest = array.new<int>(rowCount, -1)
int quietTotal = 0
for k = 0 to counted - 1
hc = array.get(hourCoils, k)
if not na(hc) and hc >= quietThreshold
row = rowHeight > 0 ? math.min(rowCount - 1, int((array.get(hourCloses, k) - windowLow) / rowHeight)) : 0
array.set(rowCounts, row, array.get(rowCounts, row) + 1)
array.set(rowNewest, row, k)
quietTotal += 1
fullest = array.max(rowCounts)
if fullest > 0
left = bar_index + PROFILE_GAP
int topRow = 0
for r = 0 to rowCount - 1
rowHits = array.get(rowCounts, r)
if rowHits > 0
topRow := r
share = float(rowHits) / fullest
widthBars = math.max(1, math.round(profileWidth * share))
rowBottom = windowLow + r * rowHeight
// Age, not count, sets the strength: quiet 0 hours ago is 10% transparent, hoursCounted ago 75%.
hoursAgo = counted - 1 - array.get(rowNewest, r)
fade = math.min(75.0, 10.0 + 65.0 * hoursAgo / hoursCounted)
array.push(profileBoxes, box.new(left, rowBottom + rowHeight, left + widthBars, rowBottom, border_color = color(na), border_width = 0, bgcolor = color.new(tintQuiet, fade)))
// One row above the highest bar drawn, with the same one-row gap the window's high used to get.
profileTitle := label.new(left, windowLow + (topRow + 2) * rowHeight, "quiet hours", style = label.style_label_down, color = color(na), textcolor = tintQuiet, size = size.small)
// The fullest row's middle. On a tie the lower row is drawn. The label sits just LEFT of the profile, so
// it stays on screen however little right margin the chart has.
fullestRow = array.indexof(rowCounts, fullest)
price = windowLow + (fullestRow + 0.5) * rowHeight
fullestLine := line.new(bar_index - 1, price, bar_index, price, extend = extend.both, color = tintQuiet, style = line.style_dashed, width = 1)
note = str.tostring(fullest) + " of " + str.tostring(quietTotal) + " hours with a Coil of " + str.tostring(quietThreshold, "0.#") + "% or more closed in this row, out of the last " + str.tostring(counted) + " hourly closes."
fullestLabel := label.new(left - 1, price, "most quiet hours " + str.tostring(price, format.mintick), style = label.style_label_right, color = color(na), textcolor = tintQuiet, size = size.small, tooltip = note)