本页源码来自 TradingView 公开发布的开源脚本,版权归原作者所有, 请遵循其原始许可(Pine 脚本常见 CC BY-NC-SA / MPL-2.0 / MIT)。 本项目仅用于研究检索与许可范围内的移植。
//@version=6
indicator('Khajanchi Smart Swing Engine [Auto-Fibs]', shorttitle = 'KW Swing', overlay = true, max_lines_count = 100, max_labels_count = 50)
// =============================================================================
// SETTINGS TAB: ORGANIZED CONTROL PANELS
// =============================================================================
// --- 1. Moving Averages ---
GRP_MA = "1. Institutional MAs (White Chart)"
showMAs = input.bool(true, "Show 50 EMA / 200 SMA", group = GRP_MA)
lenFast = input.int(50, "Fast EMA Length", minval = 1, group = GRP_MA)
lenSlow = input.int(200, "Slow SMA Length", minval = 1, group = GRP_MA)
colFast = input.color(color.new(#2962FF, 0), "50 EMA (Deep Blue)", group = GRP_MA)
colSlow = input.color(color.new(#212121, 0), "200 SMA (Solid Black)", group = GRP_MA)
// --- 2. Dynamic ATR Swing Structure ---
GRP_SR = "2. ATR Dynamic Swings (Active Only)"
showSR = input.bool(true, "Show Current Swing Pivots", group = GRP_SR)
baseLookback = input.int(10, "Base Swing Lookback", minval = 3, group = GRP_SR, tooltip = "Use 10 for 4H. Use 5 to 7 for Daily.")
colResist = input.color(color.new(#D50000, 0), "Resistance (Deep Red)", group = GRP_SR)
colSupport = input.color(color.new(#00C853, 0), "Support (Deep Green)", group = GRP_SR)
// --- 3. Fibonacci Retracement Zones ---
GRP_FIB = "3. Filtered Fibonacci Retracements"
showFib = input.bool(true, "Enable Fibonacci Zones", group = GRP_FIB)
colFib0 = input.color(color.new(#424242, 40), "0.0 / 1.0 (Dark Grey)", group = GRP_FIB)
colFib236 = input.color(color.new(#9E9E9E, 30), "0.236 (Grey)", group = GRP_FIB)
colFib382 = input.color(color.new(#00897B, 10), "0.382 (Teal)", group = GRP_FIB)
colFibPocket = input.color(color.new(#FF8F00, 75), "0.5 - 0.618 (Amber Pocket)", group = GRP_FIB)
colFib786 = input.color(color.new(#1565C0, 20), "0.786 (Deep Blue)", group = GRP_FIB)
// --- 4. RSI Divergence Engine ---
GRP_RSI = "4. RSI Divergence (Trend Filtered)"
showDiv = input.bool(true, "Show RSI Divergence Signals", group = GRP_RSI)
// --- 5. Telemetry HUD ---
GRP_SIG = "5. Signals & Dashboard"
showHUD = input.bool(true, "Show Top-Right HUD Dashboard", group = GRP_SIG)
// =============================================================================
// 1. INSTITUTIONAL MAs & REGIME FILTER
// =============================================================================
ema50 = ta.ema(close, lenFast)
sma200 = ta.sma(close, lenSlow)
plot(showMAs ? ema50 : na, "Fast EMA", color = colFast, linewidth = 2, style = plot.style_line)
plot(showMAs ? sma200 : na, "Slow SMA", color = colSlow, linewidth = 2, style = plot.style_line)
isUptrend = close > sma200
isDowntrend = close < sma200
lowCrossUnder = ta.crossunder(low, ema50)
highCrossOver = ta.crossover(high, ema50)
pullbackBull = isUptrend and lowCrossUnder and close > ema50
pullbackBear = isDowntrend and highCrossOver and close < ema50
alertcondition(pullbackBull, "Bullish Pullback", "Price in uptrend touched the 50 EMA.")
alertcondition(pullbackBear, "Bearish Pullback", "Price in downtrend touched the 50 EMA.")
// =============================================================================
// 2. ATR DYNAMIC PIVOTS (Clean Chart Single Lines)
// =============================================================================
atr = ta.atr(14)
atrAvg = ta.sma(atr, 50)
volatilityRatio = atrAvg == 0 ? 1 : atr / atrAvg
dynLookback = math.max(3, math.round(baseLookback / volatilityRatio))
ph = ta.pivothigh(high, dynLookback, dynLookback)
pl = ta.pivotlow(low, dynLookback, dynLookback)
var float last_high = na
var float last_low = na
var int last_high_time = na
var int last_low_time = na
var line resLine = na
var line supLine = na
if not na(ph)
last_high := ph
last_high_time := time[dynLookback]
if showSR
if na(resLine)
resLine := line.new(last_high_time, last_high, time, last_high, xloc=xloc.bar_time, color=colResist, width=2)
else
line.set_xy1(resLine, last_high_time, last_high)
line.set_xy2(resLine, time, last_high)
line.set_color(resLine, colResist)
if not na(pl)
last_low := pl
last_low_time := time[dynLookback]
if showSR
if na(supLine)
supLine := line.new(last_low_time, last_low, time, last_low, xloc=xloc.bar_time, color=colSupport, width=2)
else
line.set_xy1(supLine, last_low_time, last_low)
line.set_xy2(supLine, time, last_low)
line.set_color(supLine, colSupport)
// Extend the active support/resistance lines to the right edge
if barstate.islast
int extTime = time + (time - time[1]) * 10
if not na(resLine) and showSR
line.set_x2(resLine, extTime)
if not na(supLine) and showSR
line.set_x2(supLine, extTime)
// =============================================================================
// 3. FIBONACCI RETRACEMENT ENGINE (Color Filled Zones)
// =============================================================================
var line line_0 = na
var line line_236 = na
var line line_382 = na
var line line_500 = na
var line line_618 = na
var line line_786 = na
var line line_100 = na
var linefill fill_pocket = na
f_draw_line(ln, x1, x2, y, col) =>
if na(ln)
line.new(x1, y, x2, y, xloc=xloc.bar_time, color=col, style=line.style_dotted)
else
line.set_xy1(ln, x1, y)
line.set_xy2(ln, x2, y)
line.set_color(ln, col)
ln
if showFib and barstate.islast and not na(last_high) and not na(last_low)
if (isUptrend and last_high_time > last_low_time) or (isDowntrend and last_low_time > last_high_time)
bool isBull = isUptrend
float diff = last_high - last_low
int startTime = math.min(last_high_time, last_low_time)
int extTimeFibs = time + (time - time[1]) * 10
float p0 = isBull ? last_high : last_low
float p100 = isBull ? last_low : last_high
float l236 = isBull ? last_high - diff * 0.236 : last_low + diff * 0.236
float l382 = isBull ? last_high - diff * 0.382 : last_low + diff * 0.382
float l500 = isBull ? last_high - diff * 0.500 : last_low + diff * 0.500
float l618 = isBull ? last_high - diff * 0.618 : last_low + diff * 0.618
float l786 = isBull ? last_high - diff * 0.786 : last_low + diff * 0.786
line_0 := f_draw_line(line_0, startTime, extTimeFibs, p0, colFib0)
line_236 := f_draw_line(line_236, startTime, extTimeFibs, l236, colFib236)
line_382 := f_draw_line(line_382, startTime, extTimeFibs, l382, colFib382)
line_500 := f_draw_line(line_500, startTime, extTimeFibs, l500, color.new(colFibPocket, 0))
line_618 := f_draw_line(line_618, startTime, extTimeFibs, l618, color.new(colFibPocket, 0))
line_786 := f_draw_line(line_786, startTime, extTimeFibs, l786, colFib786)
line_100 := f_draw_line(line_100, startTime, extTimeFibs, p100, colFib0)
if na(fill_pocket)
fill_pocket := linefill.new(line_500, line_618, colFibPocket)
else
linefill.set_color(fill_pocket, colFibPocket)
// =============================================================================
// 4. RSI (7) DIVERGENCE ENGINE
// =============================================================================
rsi7 = ta.rsi(close, 7)
rsi_ph = ta.pivothigh(rsi7, dynLookback, dynLookback)
rsi_pl = ta.pivotlow(rsi7, dynLookback, dynLookback)
prev_rsi_pl_val = ta.valuewhen(not na(rsi_pl), rsi7[dynLookback], 1)
prev_rsi_ph_val = ta.valuewhen(not na(rsi_ph), rsi7[dynLookback], 1)
bullDiv = isUptrend and not na(pl) and not na(rsi_pl) and low[dynLookback] < last_low[1] and rsi7[dynLookback] > prev_rsi_pl_val
plotshape(showDiv and bullDiv ? low[dynLookback] : na, "Bullish Divergence", shape.arrowup, location.belowbar, color.new(#00C853,0), size=size.small)
bearDiv = isDowntrend and not na(ph) and not na(rsi_ph) and high[dynLookback] > last_high[1] and rsi7[dynLookback] < prev_rsi_ph_val
plotshape(showDiv and bearDiv ? high[dynLookback] : na, "Bearish Divergence", shape.arrowdown, location.abovebar, color.new(#D50000,0), size=size.small)
// =============================================================================
// 5. TELEMETRY HUD
// =============================================================================
var table hud = table.new(position.top_right, 2, 4, bgcolor = color.new(color.white, 5), border_width = 1, border_color = color.new(#E0E0E0, 0))
if showHUD and barstate.islast
bool isBull = close > sma200
rsiStatus = rsi7 > 60 ? "Bull Power" : rsi7 < 40 ? "Bear Power" : "Neutral / Consolidation"
rsiColor = rsi7 > 60 ? color.new(#00C853,0) : rsi7 < 40 ? color.new(#D50000,0) : color.new(#757575,0)
table.cell(hud, 0, 0, "Regime Bias", text_color=color.black, text_size=size.small, text_halign=text.align_left)
table.cell(hud, 1, 0, isBull ? "BULLISH" : "BEARISH", text_color=isBull ? color.new(#00C853,0) : color.new(#D50000,0), text_size=size.small, text_halign=text.align_right)
table.cell(hud, 0, 1, "RSI (7) State", text_color=color.black, text_size=size.small, text_halign=text.align_left)
table.cell(hud, 1, 1, rsiStatus + " (" + str.tostring(rsi7, "#.0") + ")", text_color=rsiColor, text_size=size.small, text_halign=text.align_right)
table.cell(hud, 0, 2, "Swing Lookback", text_color=color.black, text_size=size.small, text_halign=text.align_left)
table.cell(hud, 1, 2, str.tostring(dynLookback) + " Bars (ATR Adj)", text_color=color.black, text_size=size.small, text_halign=text.align_right)
table.cell(hud, 0, 3, "200 SMA Ref", text_color=color.black, text_size=size.small, text_halign=text.align_left)
table.cell(hud, 1, 3, str.tostring(sma200, "#.##"), text_color=color.gray, text_size=size.small, text_halign=text.align_right)