本页源码来自 TradingView 公开发布的开源脚本,版权归原作者所有, 请遵循其原始许可(Pine 脚本常见 CC BY-NC-SA / MPL-2.0 / MIT)。 本项目仅用于研究检索与许可范围内的移植。
//@version=6
indicator(
"EMA Stack Auto Trendlines",
overlay=true,
max_lines_count=500,
max_labels_count=500)
//=====================================================================
// 1. EMA SETTINGS
//=====================================================================
groupEMA = "1. EMA Settings"
ema5Length = input.int(5, "EMA 5", minval=1, group=groupEMA)
ema12Length = input.int(12, "EMA 12", minval=1, group=groupEMA)
ema34Length = input.int(34, "EMA 34", minval=1, group=groupEMA)
ema50Length = input.int(50, "EMA 50", minval=1, group=groupEMA)
ema72Length = input.int(72, "EMA 72", minval=1, group=groupEMA)
ema89Length = input.int(89, "EMA 89", minval=1, group=groupEMA)
src = input.source(hl2, "Source", group=groupEMA)
//=====================================================================
// 2. EMA STACK CONFIRMATION
//=====================================================================
groupStack = "2. EMA Stack Confirmation"
stackConfirmationBars = input.int(
3,
"Confirmation Bars",
minval=1,
maxval=20,
tooltip=
"Number of consecutive bars the full opposite EMA stack " +
"must remain valid before a swing changes direction.",
group=groupStack)
//=====================================================================
// 3. SWING DEPTH FILTER
//=====================================================================
groupFilter = "3. Swing Filter"
filterMode = input.string(
"Percent",
"Minimum Swing Measured In",
options=["ATR", "Percent", "Off"],
tooltip=
"Rejects swings that are too small. Percent travels better " +
"across timeframes than ATR, because the same ATR multiple " +
"means very different things on 5m and 1h.",
group=groupFilter)
atrLength = input.int(14, "ATR Length", minval=1, group=groupFilter)
atrMultiplier = input.float(
3.0,
"ATR Multiple",
minval=0.0,
step=0.25,
group=groupFilter)
percentMove = input.float(
2.0,
"Percent Move",
minval=0.0,
step=0.1,
group=groupFilter)
minimumBarsBetweenPivots = input.int(
5,
"Minimum Bars Between Pivots",
minval=0,
tooltip=
"Minimum distance between the previous opposite pivot " +
"and the new candidate pivot. Set to 0 to disable.",
group=groupFilter)
rejectedPivotBehavior = input.string(
"Continue Current Swing",
"When A Pivot Is Rejected",
options=["Continue Current Swing", "Switch Anyway"],
tooltip=
"Continue Current Swing: the swing keeps running and keeps " +
"tracking the same extreme, so a shallow counter-move " +
"leaves NO pivot on either side of it. This is what you " +
"want in almost every case.\n\n" +
"Switch Anyway: the swing ends even though no pivot is " +
"recorded. This permits two highs in a row with no low " +
"between them, but it also lets the far side of a shallow " +
"wiggle register as a pivot.",
group=groupFilter)
continueOnReject = rejectedPivotBehavior == "Continue Current Swing"
//=====================================================================
// 4. GENERAL TRENDLINE SETTINGS
//=====================================================================
groupGeneral = "4. General Trendline Settings"
historicLinesToShow = input.int(
10,
"Historic Trendlines To Show",
minval=0,
maxval=50,
tooltip=
"Number of older HIGH lines and older LOW lines to keep. " +
"The current recent high and recent low are additional.",
group=groupGeneral)
showHighLines = input.bool(true, "Show High Trendlines", group=groupGeneral)
showLowLines = input.bool(true, "Show Low Trendlines", group=groupGeneral)
showSwingPoints = input.bool(false, "Show Swing Points", group=groupGeneral)
showFormingLeg = input.bool(
true,
"Show Forming Trendline",
tooltip=
"Shows the unconfirmed line from the previous confirmed " +
"same-side pivot to the current developing extreme.",
group=groupGeneral)
formingLegWidth = input.int(
1,
"Forming Line Thickness",
minval=1,
maxval=5,
group=groupGeneral)
formingTransparency = input.int(
50,
"Forming Line Transparency",
minval=0,
maxval=95,
group=groupGeneral)
//=====================================================================
// 5. RECENT HIGH TRENDLINE STYLE
//=====================================================================
groupRecentHigh = "5. Recent High Trendline"
recentHighColor = input.color(color.red, "Color", group=groupRecentHigh)
recentHighWidth = input.int(2, "Thickness", minval=1, maxval=5, group=groupRecentHigh)
recentHighStyleInput = input.string(
"Solid",
"Line Type",
options=["Solid", "Dashed", "Dotted"],
group=groupRecentHigh)
recentHighExtendInput = input.string(
"Right",
"Extend",
options=["None", "Right"],
group=groupRecentHigh)
//=====================================================================
// 6. RECENT LOW TRENDLINE STYLE
//=====================================================================
groupRecentLow = "6. Recent Low Trendline"
recentLowColor = input.color(color.green, "Color", group=groupRecentLow)
recentLowWidth = input.int(2, "Thickness", minval=1, maxval=5, group=groupRecentLow)
recentLowStyleInput = input.string(
"Solid",
"Line Type",
options=["Solid", "Dashed", "Dotted"],
group=groupRecentLow)
recentLowExtendInput = input.string(
"Right",
"Extend",
options=["None", "Right"],
group=groupRecentLow)
//=====================================================================
// 7. HISTORIC HIGH TRENDLINE STYLE
//=====================================================================
groupHistoricHigh = "7. Historic High Trendlines"
historicHighColor = input.color(color.new(color.red, 60), "Color", group=groupHistoricHigh)
historicHighWidth = input.int(1, "Thickness", minval=1, maxval=5, group=groupHistoricHigh)
historicHighStyleInput = input.string(
"Dashed",
"Line Type",
options=["Solid", "Dashed", "Dotted"],
group=groupHistoricHigh)
historicHighExtendInput = input.string(
"None",
"Extend",
options=["None", "Right"],
group=groupHistoricHigh)
//=====================================================================
// 8. HISTORIC LOW TRENDLINE STYLE
//=====================================================================
groupHistoricLow = "8. Historic Low Trendlines"
historicLowColor = input.color(color.new(color.green, 60), "Color", group=groupHistoricLow)
historicLowWidth = input.int(1, "Thickness", minval=1, maxval=5, group=groupHistoricLow)
historicLowStyleInput = input.string(
"Dashed",
"Line Type",
options=["Solid", "Dashed", "Dotted"],
group=groupHistoricLow)
historicLowExtendInput = input.string(
"None",
"Extend",
options=["None", "Right"],
group=groupHistoricLow)
//=====================================================================
// 9. CONVERT VISUAL SETTINGS
//=====================================================================
getLineStyle(string value) =>
value == "Dashed" ? line.style_dashed :
value == "Dotted" ? line.style_dotted :
line.style_solid
getLineExtend(string value) =>
value == "Right" ? extend.right : extend.none
recentHighStyle = getLineStyle(recentHighStyleInput)
recentLowStyle = getLineStyle(recentLowStyleInput)
historicHighStyle = getLineStyle(historicHighStyleInput)
historicLowStyle = getLineStyle(historicLowStyleInput)
recentHighExtend = getLineExtend(recentHighExtendInput)
recentLowExtend = getLineExtend(recentLowExtendInput)
historicHighExtend = getLineExtend(historicHighExtendInput)
historicLowExtend = getLineExtend(historicLowExtendInput)
//=====================================================================
// 10. EMA CALCULATIONS
//=====================================================================
ema5 = ta.ema(src, ema5Length)
ema12 = ta.ema(src, ema12Length)
ema34 = ta.ema(src, ema34Length)
ema50 = ta.ema(src, ema50Length)
ema72 = ta.ema(src, ema72Length)
ema89 = ta.ema(src, ema89Length)
atrValue = ta.atr(atrLength)
//=====================================================================
// 11. EXACT EMA STACK CONDITIONS
//=====================================================================
bullStack =
ema5 > ema12 and
ema12 > ema34 and
ema34 > ema50 and
ema50 > ema72 and
ema72 > ema89
bearStack =
ema5 < ema12 and
ema12 < ema34 and
ema34 < ema50 and
ema50 < ema72 and
ema72 < ema89
//=====================================================================
// 12. COUNT CONSECUTIVE STACK BARS
//=====================================================================
var int bullStackCount = 0
var int bearStackCount = 0
if bullStack
bullStackCount := bullStackCount + 1
else
bullStackCount := 0
if bearStack
bearStackCount := bearStackCount + 1
else
bearStackCount := 0
confirmedBullStack = bullStackCount >= stackConfirmationBars
confirmedBearStack = bearStackCount >= stackConfirmationBars
//=====================================================================
// 13. MINIMUM SWING DISTANCE
//=====================================================================
getMinimumSwingDistance(float pivotPrice) =>
float result = 0.0
if filterMode == "ATR"
result := atrMultiplier * atrValue
else if filterMode == "Percent"
result := pivotPrice * percentMove / 100.0
result
//=====================================================================
// 14. TREND STATE
//=====================================================================
//
// 0 = Waiting for first confirmed full EMA stack
// 1 = Bullish swing
// -1 = Bearish swing
//
// During bullish state: track EVERY candle high.
// During bearish state: track EVERY candle low.
//
// Direction changes only after the COMPLETE opposite six-EMA stack
// remains valid for stackConfirmationBars consecutive candles AND the
// candidate pivot passes the swing filter.
//
// If the candidate FAILS the filter, the swing does not end. It keeps
// running and keeps tracking the same extreme, so a shallow wiggle
// leaves no pivot on either side of it.
//=====================================================================
var int trendState = 0
//=====================================================================
// 15. ACTIVE SWING EXTREMES
//=====================================================================
var float bullHigh = na
var int bullHighBar = na
var float bearLow = na
var int bearLowBar = na
//=====================================================================
// 16. PREVIOUS CONFIRMED PIVOTS
//=====================================================================
var float previousHigh = na
var int previousHighBar = na
var float previousLow = na
var int previousLowBar = na
var int lastConfirmedPivotBar = na
//=====================================================================
// 17. TRENDLINE STORAGE
//=====================================================================
var line recentHighLine = na
var line recentLowLine = na
var line formingLine = na
var array<line> historicHighLines = array.new_line()
var array<line> historicLowLines = array.new_line()
//=====================================================================
// 18. HISTORIC STYLE FUNCTIONS
//=====================================================================
makeHighHistoric(line ln) =>
line.set_color(ln, historicHighColor)
line.set_width(ln, historicHighWidth)
line.set_style(ln, historicHighStyle)
line.set_extend(ln, historicHighExtend)
makeLowHistoric(line ln) =>
line.set_color(ln, historicLowColor)
line.set_width(ln, historicLowWidth)
line.set_style(ln, historicLowStyle)
line.set_extend(ln, historicLowExtend)
//=====================================================================
// 19. ALERT FLAGS
//=====================================================================
bool newHighConfirmed = false
bool newLowConfirmed = false
//=====================================================================
// 20. INITIALIZE FIRST TREND
//=====================================================================
if trendState == 0
if confirmedBullStack
trendState := 1
bullHigh := high
bullHighBar := bar_index
else if confirmedBearStack
trendState := -1
bearLow := low
bearLowBar := bar_index
//=====================================================================
// 21. BULLISH SWING
//=====================================================================
else if trendState == 1
//-----------------------------------------------------------------
// Track EVERY high while the bullish swing is active.
//-----------------------------------------------------------------
if na(bullHigh) or high > bullHigh
bullHigh := high
bullHighBar := bar_index
//-----------------------------------------------------------------
// Full persistent bearish stack offers to end the bullish swing.
//-----------------------------------------------------------------
if confirmedBearStack
//-------------------------------------------------------------
// SWING DEPTH FILTER
//-------------------------------------------------------------
bool depthAccepted = true
if not na(previousLow)
if filterMode != "Off"
depthAccepted :=
bullHigh - previousLow >=
getMinimumSwingDistance(bullHigh)
//-------------------------------------------------------------
// MINIMUM BAR SEPARATION FILTER
//-------------------------------------------------------------
bool barsAccepted = true
if not na(lastConfirmedPivotBar)
if minimumBarsBetweenPivots > 0
barsAccepted :=
bullHighBar - lastConfirmedPivotBar >=
minimumBarsBetweenPivots
bool highAccepted =
not na(bullHigh) and
depthAccepted and
barsAccepted
//-------------------------------------------------------------
// RELEASE VALVE
//
// If the swing has been held open by a failed depth test but
// price has now travelled a full swing distance DOWN from the
// tracked high, the high is real regardless of where the last
// confirmed low sits. Without this the state machine can lock
// in one direction permanently when the rejected leg never
// deepens.
//-------------------------------------------------------------
if continueOnReject and not highAccepted and barsAccepted
if not na(bullHigh)
if bullHigh - low >= getMinimumSwingDistance(bullHigh)
highAccepted := true
//-------------------------------------------------------------
// CONFIRM HIGH
//-------------------------------------------------------------
if highAccepted
newHighConfirmed := true
if not na(previousHigh)
if showHighLines
if not na(recentHighLine)
makeHighHistoric(recentHighLine)
array.push(historicHighLines, recentHighLine)
while array.size(historicHighLines) > historicLinesToShow
oldHighLine = array.shift(historicHighLines)
line.delete(oldHighLine)
recentHighLine :=
line.new(
x1=previousHighBar,
y1=previousHigh,
x2=bullHighBar,
y2=bullHigh,
xloc=xloc.bar_index,
extend=recentHighExtend,
color=recentHighColor,
style=recentHighStyle,
width=recentHighWidth)
if showSwingPoints
label.new(
x=bullHighBar,
y=bullHigh,
text="H",
xloc=xloc.bar_index,
yloc=yloc.price,
style=label.style_label_down,
color=recentHighColor,
textcolor=color.white,
size=size.tiny)
previousHigh := bullHigh
previousHighBar := bullHighBar
lastConfirmedPivotBar := bullHighBar
//-------------------------------------------------------------
// END THE SWING
//
// Only when the high was actually confirmed, or when the user
// has chosen Switch Anyway. If the candidate was rejected and
// Continue Current Swing is set, the bullish swing stays open
// and bullHigh keeps tracking, so the shallow dip that follows
// can never be recorded as a low.
//-------------------------------------------------------------
if highAccepted or not continueOnReject
trendState := -1
bearLow := low
bearLowBar := bar_index
bullHigh := na
bullHighBar := na
//=====================================================================
// 22. BEARISH SWING
//=====================================================================
else if trendState == -1
//-----------------------------------------------------------------
// Track EVERY low while the bearish swing is active.
//-----------------------------------------------------------------
if na(bearLow) or low < bearLow
bearLow := low
bearLowBar := bar_index
//-----------------------------------------------------------------
// Full persistent bullish stack offers to end the bearish swing.
//-----------------------------------------------------------------
if confirmedBullStack
//-------------------------------------------------------------
// SWING DEPTH FILTER
//-------------------------------------------------------------
bool depthAccepted = true
if not na(previousHigh)
if filterMode != "Off"
depthAccepted :=
previousHigh - bearLow >=
getMinimumSwingDistance(bearLow)
//-------------------------------------------------------------
// MINIMUM BAR SEPARATION FILTER
//-------------------------------------------------------------
bool barsAccepted = true
if not na(lastConfirmedPivotBar)
if minimumBarsBetweenPivots > 0
barsAccepted :=
bearLowBar - lastConfirmedPivotBar >=
minimumBarsBetweenPivots
bool lowAccepted =
not na(bearLow) and
depthAccepted and
barsAccepted
//-------------------------------------------------------------
// RELEASE VALVE
//-------------------------------------------------------------
if continueOnReject and not lowAccepted and barsAccepted
if not na(bearLow)
if high - bearLow >= getMinimumSwingDistance(bearLow)
lowAccepted := true
//-------------------------------------------------------------
// CONFIRM LOW
//-------------------------------------------------------------
if lowAccepted
newLowConfirmed := true
if not na(previousLow)
if showLowLines
if not na(recentLowLine)
makeLowHistoric(recentLowLine)
array.push(historicLowLines, recentLowLine)
while array.size(historicLowLines) > historicLinesToShow
oldLowLine = array.shift(historicLowLines)
line.delete(oldLowLine)
recentLowLine :=
line.new(
x1=previousLowBar,
y1=previousLow,
x2=bearLowBar,
y2=bearLow,
xloc=xloc.bar_index,
extend=recentLowExtend,
color=recentLowColor,
style=recentLowStyle,
width=recentLowWidth)
if showSwingPoints
label.new(
x=bearLowBar,
y=bearLow,
text="L",
xloc=xloc.bar_index,
yloc=yloc.price,
style=label.style_label_up,
color=recentLowColor,
textcolor=color.white,
size=size.tiny)
previousLow := bearLow
previousLowBar := bearLowBar
lastConfirmedPivotBar := bearLowBar
//-------------------------------------------------------------
// END THE SWING
//-------------------------------------------------------------
if lowAccepted or not continueOnReject
trendState := 1
bullHigh := high
bullHighBar := bar_index
bearLow := na
bearLowBar := na
//=====================================================================
// 23. FORMING TRENDLINE
//=====================================================================
if barstate.islast
if not na(formingLine)
line.delete(formingLine)
formingLine := na
if showFormingLeg
if trendState == 1
if showHighLines and not na(previousHighBar) and not na(bullHighBar)
if bullHighBar > previousHighBar
formingLine :=
line.new(
x1=previousHighBar,
y1=previousHigh,
x2=bullHighBar,
y2=bullHigh,
xloc=xloc.bar_index,
extend=recentHighExtend,
color=color.new(recentHighColor, formingTransparency),
style=line.style_dotted,
width=formingLegWidth)
else if trendState == -1
if showLowLines and not na(previousLowBar) and not na(bearLowBar)
if bearLowBar > previousLowBar
formingLine :=
line.new(
x1=previousLowBar,
y1=previousLow,
x2=bearLowBar,
y2=bearLow,
xloc=xloc.bar_index,
extend=recentLowExtend,
color=color.new(recentLowColor, formingTransparency),
style=line.style_dotted,
width=formingLegWidth)
//=====================================================================
// 24. ALERTS
//=====================================================================
alertcondition(
newHighConfirmed,
"New Confirmed EMA Swing High",
"New EMA-stack swing HIGH confirmed.")
alertcondition(
newLowConfirmed,
"New Confirmed EMA Swing Low",
"New EMA-stack swing LOW confirmed.")