本页源码来自 TradingView 公开发布的开源脚本,版权归原作者所有, 请遵循其原始许可(Pine 脚本常见 CC BY-NC-SA / MPL-2.0 / MIT)。 本项目仅用于研究检索与许可范围内的移植。
//@version=6
indicator("3CandleWar", overlay=true, max_lines_count=500, max_labels_count=500, max_boxes_count=500)
// ============================================================
// INPUT
// ============================================================
grpLines = "Linee C1"
showLines = input.bool(true, "Mostra linee max/min di C1", group=grpLines)
maxHistory = input.int(50, "Setup confermati (C1-C2-C3 riusciti) da mantenere a video", minval=5, maxval=200, group=grpLines)
lineColor = input.color(color.new(color.gray, 60), "Colore linee (C1 in attesa di C2)", group=grpLines)
setupColor = input.color(color.new(color.fuchsia, 0), "Colore linee (C2 valido, in attesa di C3)", group=grpLines)
grpSig = "Segnali Pattern"
showBuy = input.bool(true, "Mostra segnali BUY", group=grpSig)
showSell = input.bool(true, "Mostra segnali SELL (speculare)", group=grpSig)
buyColor = input.color(color.yellow, "Colore stella Buy", group=grpSig)
sellColor = input.color(color.red, "Colore stella Sell", group=grpSig)
closeToleranceATR = input.float(0.01, "Tolleranza chiusura C3 rispetto a C1 (in ATR, 0 = chiusura netta)", minval=0, step=0.01, group=grpSig)
grpMA = "Filtro Media Mobile"
useMaFilter = input.bool(true, "Attiva filtro trend con media mobile", group=grpMA)
maTF = input.timeframe("5", "Timeframe media", group=grpMA)
maLen = input.int(20, "Periodo SMA", minval=1, group=grpMA)
maSrc = input.source(close, "Sorgente", group=grpMA)
showMaPlot = input.bool(true, "Mostra la media sul grafico", group=grpMA)
maDynamicColor = input.bool(true, "Colore media dinamico in base al trend", group=grpMA)
maColorUp = input.color(color.lime, "Colore media (prezzo sopra)", group=grpMA)
maColorDown = input.color(color.red, "Colore media (prezzo sotto)", group=grpMA)
maColorFlat = input.color(color.aqua, "Colore media (fisso, se dinamico disattivo)", group=grpMA)
grpOB = "Order Block"
obEnable = input.bool(true, "Attiva rilevamento Order Block", group=grpOB)
showObBoxes = input.bool(true, "Mostra box Order Block a grafico", group=grpOB)
obRealtimeDraw = input.bool(true, "Disegna OB anche sulla candela in formazione (repainting)", group=grpOB)
useDisplacement = input.bool(true, "Richiedi displacement (rottura forte)", group=grpOB)
atrLen = input.int(14, "Periodo ATR (displacement)", minval=1, group=grpOB)
dispMult = input.float(1.2, "Moltiplicatore ATR per displacement", minval=0.1, step=0.1, group=grpOB)
obBoxCount = input.int(5, "Numero massimo OB per lato a video", minval=1, maxval=20, group=grpOB)
obMitigateOnClose = input.bool(true, "Mitigazione su chiusura (altrimenti su wick)", group=grpOB)
obProximityATR = input.float(0.5, "Margine 'a ridosso' (in ATR)", minval=0, step=0.1, group=grpOB)
obBypassMaOnTouch = input.bool(true, "Bypassa filtro MA se C1 o C2 toccano un OB concorde", group=grpOB)
obBorderTransp = input.int(70, "Trasparenza bordo OB (0 = pieno, 100 = invisibile)", minval=0, maxval=100, group=grpOB)
bullObColor = input.color(color.new(color.teal, 80), "Colore box Bullish OB", group=grpOB)
bearObColor = input.color(color.new(color.orange, 80), "Colore box Bearish OB", group=grpOB)
warnColor = input.color(color.new(color.fuchsia, 0), "Colore label warning (OB lato opposto)", group=grpOB)
grpDbg = "Debug"
dbgOB = input.bool(false, "Debug: mostra stato tocco OB su C1/C2 e tolleranza C3", group=grpDbg)
// ============================================================
// STATO
// ============================================================
var int state = 0
var float c1High = na
var float c1Low = na
var line c1HiLine = na
var line c1LoLine = na
var bool isBuySetup = false
var bool isSellSetup = false
// Flag: C1 o C2 hanno toccato un OB concorde
var bool c1c2TouchedBullOB = false
var bool c1c2TouchedBearOB = false
// Anti-duplicato OB per barra
var int lastBullOBBar = -1
var int lastBearOBBar = -1
var line[] histHi = array.new_line()
var line[] histLo = array.new_line()
// reset ogni barra
buySignal = false
sellSignal = false
buyNearOB = false
sellNearOB = false
buyWarnOB = false
sellWarnOB = false
// ============================================================
// MEDIA MOBILE SU TIMEFRAME CUSTOM (filtro trend) + colore dinamico
// ============================================================
maValue = request.security(syminfo.tickerid, maTF, ta.sma(maSrc, maLen), lookahead=barmerge.lookahead_off)
maPlotColor = maDynamicColor ? (close > maValue ? maColorUp : close < maValue ? maColorDown : maColorFlat) : maColorFlat
plot(showMaPlot ? maValue : na, title="SMA Filtro", color=maPlotColor, linewidth=2)
aboveMa = not useMaFilter or close > maValue
belowMa = not useMaFilter or close < maValue
// ============================================================
// ORDER BLOCK: strutture dati
// ============================================================
var box[] bullBoxes = array.new_box()
var float[] bullTop = array.new_float()
var float[] bullBottom = array.new_float()
var box[] bearBoxes = array.new_box()
var float[] bearTop = array.new_float()
var float[] bearBottom = array.new_float()
atrVal = ta.atr(atrLen)
// ============================================================
// ORDER BLOCK: mitigazione (solo a barra confermata)
// ============================================================
if barstate.isconfirmed and obEnable
if array.size(bullBoxes) > 0
for i = array.size(bullBoxes) - 1 to 0
bx = array.get(bullBoxes, i)
bot = array.get(bullBottom, i)
box.set_right(bx, bar_index)
mitigated = obMitigateOnClose ? close < bot : low < bot
if mitigated
box.delete(bx)
array.remove(bullBoxes, i)
array.remove(bullTop, i)
array.remove(bullBottom, i)
if array.size(bearBoxes) > 0
for i = array.size(bearBoxes) - 1 to 0
bx = array.get(bearBoxes, i)
top = array.get(bearTop, i)
box.set_right(bx, bar_index)
mitigated = obMitigateOnClose ? close > top : high > top
if mitigated
box.delete(bx)
array.remove(bearBoxes, i)
array.remove(bearTop, i)
array.remove(bearBottom, i)
// ============================================================
// ORDER BLOCK: creazione (in tempo reale o solo a barra confermata)
// ============================================================
if obEnable and (obRealtimeDraw or barstate.isconfirmed)
// --- Bullish OB ---
bullishOB = close[1] < open[1] and close > high[1] and (not useDisplacement or (close - open) > atrVal * dispMult)
if bullishOB and bar_index != lastBullOBBar
obTop = high[1]
obBot = low[1]
newBoxBull = box.new(left=bar_index[1], top=obTop, right=bar_index, bottom=obBot, border_color=color.new(bullObColor, obBorderTransp), bgcolor=showObBoxes ? bullObColor : na)
array.push(bullBoxes, newBoxBull)
array.push(bullTop, obTop)
array.push(bullBottom, obBot)
lastBullOBBar := bar_index
if array.size(bullBoxes) > obBoxCount
box.delete(array.shift(bullBoxes))
array.shift(bullTop)
array.shift(bullBottom)
// --- Bearish OB ---
bearishOB = close[1] > open[1] and close < low[1] and (not useDisplacement or (open - close) > atrVal * dispMult)
if bearishOB and bar_index != lastBearOBBar
obTop = high[1]
obBot = low[1]
newBoxBear = box.new(left=bar_index[1], top=obTop, right=bar_index, bottom=obBot, border_color=color.new(bearObColor, obBorderTransp), bgcolor=showObBoxes ? bearObColor : na)
array.push(bearBoxes, newBoxBear)
array.push(bearTop, obTop)
array.push(bearBottom, obBot)
lastBearOBBar := bar_index
if array.size(bearBoxes) > obBoxCount
box.delete(array.shift(bearBoxes))
array.shift(bearTop)
array.shift(bearBottom)
// ============================================================
// FUNZIONI DI VERIFICA OB
// ============================================================
// Verifica se un prezzo (px) è dentro o vicino a un box OB
f_nearAnyBox(tops, bottoms, px, margin) =>
bool found = false
if array.size(tops) > 0
for i = 0 to array.size(tops) - 1
t = array.get(tops, i)
b = array.get(bottoms, i)
if px <= t + margin and px >= b - margin
found := true
found
// Verifica se il range [lo, hi] di una candela si sovrappone a un box OB
f_overlapsAnyBox(tops, bottoms, lo, hi, margin) =>
bool found = false
if array.size(tops) > 0
for i = 0 to array.size(tops) - 1
t = array.get(tops, i)
b = array.get(bottoms, i)
if hi >= b - margin and lo <= t + margin
found := true
found
// ============================================================
// CHECK IN TEMPO REALE (ogni tick, non solo a barra chiusa)
// ============================================================
if state == 2
margin = atrVal * obProximityATR
tolC3 = atrVal * closeToleranceATR
buyBase = isBuySetup and low >= c1Low and high >= c1High and close > c1High - tolC3
sellBase = isSellSetup and high <= c1High and low <= c1Low and close < c1Low + tolC3
buyNearOBcheck = obEnable and buyBase and f_nearAnyBox(bullTop, bullBottom, close, margin)
sellNearOBcheck = obEnable and sellBase and f_nearAnyBox(bearTop, bearBottom, close, margin)
buyWarnOBcheck = obEnable and buyBase and f_nearAnyBox(bearTop, bearBottom, close, margin)
sellWarnOBcheck = obEnable and sellBase and f_nearAnyBox(bullTop, bullBottom, close, margin)
buyBypassMa = obEnable and obBypassMaOnTouch and c1c2TouchedBullOB
sellBypassMa = obEnable and obBypassMaOnTouch and c1c2TouchedBearOB
buyConfirm = buyBase and (aboveMa or buyNearOBcheck or buyBypassMa)
sellConfirm = sellBase and (belowMa or sellNearOBcheck or sellBypassMa)
if buyConfirm and showBuy
buySignal := true
buyNearOB := buyNearOBcheck
buyWarnOB := buyWarnOBcheck
if sellConfirm and showSell
sellSignal := true
sellNearOB := sellNearOBcheck
sellWarnOB := sellWarnOBcheck
// ============================================================
// LOGICA STATEFUL (solo a barra confermata)
// ============================================================
if barstate.isconfirmed
if state == 0
c1High := high
c1Low := low
c1c2TouchedBullOB := false
c1c2TouchedBearOB := false
if obEnable
marginC1 = atrVal * obProximityATR
if f_overlapsAnyBox(bullTop, bullBottom, low, high, marginC1)
c1c2TouchedBullOB := true
if f_overlapsAnyBox(bearTop, bearBottom, low, high, marginC1)
c1c2TouchedBearOB := true
if showLines
c1HiLine := line.new(bar_index, high, bar_index + 2, high, xloc=xloc.bar_index, color=lineColor, width=1)
c1LoLine := line.new(bar_index, low, bar_index + 2, low, xloc=xloc.bar_index, color=lineColor, width=1)
state := 1
else if state == 1
brokeDown = low < c1Low
brokeUp = high > c1High
reclaimed = close >= c1Low and close <= c1High
buySetup = brokeDown and not brokeUp and reclaimed
sellSetup = brokeUp and not brokeDown and reclaimed
if obEnable and (buySetup or sellSetup)
marginC2 = atrVal * obProximityATR
if f_overlapsAnyBox(bullTop, bullBottom, low, high, marginC2)
c1c2TouchedBullOB := true
if f_overlapsAnyBox(bearTop, bearBottom, low, high, marginC2)
c1c2TouchedBearOB := true
if buySetup or sellSetup
isBuySetup := buySetup
isSellSetup := sellSetup
if showLines and not na(c1HiLine)
line.set_color(c1HiLine, setupColor)
line.set_color(c1LoLine, setupColor)
state := 2
else
if not na(c1HiLine)
line.delete(c1HiLine)
line.delete(c1LoLine)
c1High := high
c1Low := low
c1c2TouchedBullOB := false
c1c2TouchedBearOB := false
if obEnable
marginC1 = atrVal * obProximityATR
if f_overlapsAnyBox(bullTop, bullBottom, low, high, marginC1)
c1c2TouchedBullOB := true
if f_overlapsAnyBox(bearTop, bearBottom, low, high, marginC1)
c1c2TouchedBearOB := true
if showLines
c1HiLine := line.new(bar_index, high, bar_index + 2, high, xloc=xloc.bar_index, color=lineColor, width=1)
c1LoLine := line.new(bar_index, low, bar_index + 2, low, xloc=xloc.bar_index, color=lineColor, width=1)
else
c1HiLine := na
c1LoLine := na
state := 1
else if state == 2
margin = atrVal * obProximityATR
tolC3F = atrVal * closeToleranceATR
buyBaseFinal = isBuySetup and low >= c1Low and high >= c1High and close > c1High - tolC3F
sellBaseFinal = isSellSetup and high <= c1High and low <= c1Low and close < c1Low + tolC3F
buyNearOBFinal = obEnable and buyBaseFinal and f_nearAnyBox(bullTop, bullBottom, close, margin)
sellNearOBFinal = obEnable and sellBaseFinal and f_nearAnyBox(bearTop, bearBottom, close, margin)
buyBypassMaFinal = obEnable and obBypassMaOnTouch and c1c2TouchedBullOB
sellBypassMaFinal = obEnable and obBypassMaOnTouch and c1c2TouchedBearOB
buyConfirmFinal = buyBaseFinal and (aboveMa or buyNearOBFinal or buyBypassMaFinal)
sellConfirmFinal = sellBaseFinal and (belowMa or sellNearOBFinal or sellBypassMaFinal)
if dbgOB
label.new(bar_index, high,
text="C1C2 BullOB=" + str.tostring(c1c2TouchedBullOB) + "\nC1C2 BearOB=" + str.tostring(c1c2TouchedBearOB) +
"\nC1 low=" + str.tostring(c1Low, "#.#####") + " C1 high=" + str.tostring(c1High, "#.#####") +
"\nC3 low=" + str.tostring(low, "#.#####") + " close=" + str.tostring(close, "#.#####") +
"\ntol=" + str.tostring(tolC3F, "#.#####") +
"\nsellBase=" + str.tostring(sellBaseFinal) + " buyBase=" + str.tostring(buyBaseFinal) +
"\nsellConfirm=" + str.tostring(sellConfirmFinal) + " buyConfirm=" + str.tostring(buyConfirmFinal),
style=label.style_label_down, color=color.new(color.blue, 60), textcolor=color.white, size=size.tiny)
if buyConfirmFinal or sellConfirmFinal
if not na(c1HiLine)
array.push(histHi, c1HiLine)
array.push(histLo, c1LoLine)
while array.size(histHi) > maxHistory
line.delete(array.shift(histHi))
line.delete(array.shift(histLo))
isBuySetup := false
isSellSetup := false
c1c2TouchedBullOB := false
c1c2TouchedBearOB := false
state := 0
else
if not na(c1HiLine)
line.delete(c1HiLine)
line.delete(c1LoLine)
isBuySetup := false
isSellSetup := false
c1High := high
c1Low := low
c1c2TouchedBullOB := false
c1c2TouchedBearOB := false
if obEnable
marginC1 = atrVal * obProximityATR
if f_overlapsAnyBox(bullTop, bullBottom, low, high, marginC1)
c1c2TouchedBullOB := true
if f_overlapsAnyBox(bearTop, bearBottom, low, high, marginC1)
c1c2TouchedBearOB := true
if showLines
c1HiLine := line.new(bar_index, high, bar_index + 2, high, xloc=xloc.bar_index, color=lineColor, width=1)
c1LoLine := line.new(bar_index, low, bar_index + 2, low, xloc=xloc.bar_index, color=lineColor, width=1)
else
c1HiLine := na
c1LoLine := na
state := 1
// ============================================================
// PLOT SEGNALI
// ============================================================
plotchar(buySignal, title="Buy Star", char="★", location=location.belowbar, color=buyColor, size=size.small)
plotchar(sellSignal, title="Sell Star", char="★", location=location.abovebar, color=sellColor, size=size.small)
if buyNearOB
label.new(bar_index, low, text="OB", style=label.style_label_up, color=color.new(bullObColor, 0), textcolor=color.white, size=size.tiny)
if sellNearOB
label.new(bar_index, high, text="OB", style=label.style_label_down, color=color.new(bearObColor, 0), textcolor=color.white, size=size.tiny)
if buyWarnOB
label.new(bar_index, high, text="⚠OB", style=label.style_label_down, color=warnColor, textcolor=color.white, size=size.tiny)
if sellWarnOB
label.new(bar_index, low, text="⚠OB", style=label.style_label_up, color=warnColor, textcolor=color.white, size=size.tiny)
if buySignal
alert("BUY confermato su " + syminfo.ticker, alert.freq_once_per_bar)
if sellSignal
alert("SELL confermato su " + syminfo.ticker, alert.freq_once_per_bar)
if buyNearOB
alert("BUY confermato + confluenza Order Block su " + syminfo.ticker, alert.freq_once_per_bar)
if sellNearOB
alert("SELL confermato + confluenza Order Block su " + syminfo.ticker, alert.freq_once_per_bar)
if buyWarnOB
alert("ATTENZIONE: BUY vicino a Order Block ribassista (possibile inversione) su " + syminfo.ticker, alert.freq_once_per_bar)
if sellWarnOB
alert("ATTENZIONE: SELL vicino a Order Block rialzista (possibile inversione) su " + syminfo.ticker, alert.freq_once_per_bar)
alertcondition(isBuySetup and state == 2, title="Buy Setup In Attesa", message="Sweep minimo + reclaim: attesa conferma su C3")
alertcondition(isSellSetup and state == 2, title="Sell Setup In Attesa", message="Sweep massimo + reclaim: attesa conferma su C3")
alertcondition(buySignal, title="Buy Confermato", message="C3 conferma: pattern BUY completato")
alertcondition(sellSignal, title="Sell Confermato", message="C3 conferma: pattern SELL completato")
alertcondition(buyNearOB, title="Buy + Order Block", message="BUY confermato in confluenza con Order Block")
alertcondition(sellNearOB, title="Sell + Order Block", message="SELL confermato in confluenza con Order Block")
alertcondition(buyWarnOB, title="Buy - Warning OB opposto", message="BUY vicino a Order Block ribassista: rischio inversione")
alertcondition(sellWarnOB, title="Sell - Warning OB opposto", message="SELL vicino a Order Block rialzista: rischio inversione")