本页源码来自 TradingView 公开发布的开源脚本,版权归原作者所有, 请遵循其原始许可(Pine 脚本常见 CC BY-NC-SA / MPL-2.0 / MIT)。 本项目仅用于研究检索与许可范围内的移植。
//@version=6
indicator("RBI — Reach Back Index", shorttitle="RBI", overlay=false, max_bars_back=500)
//──────────────────────────────────────────────────────────────────────────────
// RBI — Reach Back Index
// FTDZ = main line
// Ultimate RSI = EMA-style signal line
// Reach Back Wave = ORIGINAL WaveTrend DOT LOGIC ONLY
// No FTDZ triangles. No WaveTrend line.
//──────────────────────────────────────────────────────────────────────────────
//==============================
// FTDZ SETTINGS
//==============================
groupFTDZ = "FTDZ — Main Line"
ftdzLen = input.int(10, "FTDZ Length", minval=1, group=groupFTDZ)
ftdzSmooth = input.int(1, "FTDZ Smoothing", minval=1, group=groupFTDZ)
zoneLen = input.int(50, "Dynamic Zone Length", minval=10, group=groupFTDZ)
zonePercent = input.float(70.0, "Zone Percentile", minval=50.0, maxval=99.0, step=0.5, group=groupFTDZ)
src = hl2
var float value = 0.0
var float fish = 0.0
hh = ta.highest(src, ftdzLen)
ll = ta.lowest(src, ftdzLen)
rng = hh - ll
raw = rng != 0.0 ? 2.0 * ((src - ll) / rng - 0.5) : 0.0
rawClamped = math.max(-0.999, math.min(0.999, raw))
value := 0.33 * rawClamped + 0.67 * nz(value[1])
fish := 0.5 * math.log((1.0 + value) / (1.0 - value)) + 0.5 * nz(fish[1])
ftdz = ta.ema(fish, ftdzSmooth)
upperZone = ta.percentile_linear_interpolation(ftdz, zoneLen, zonePercent)
lowerZone = ta.percentile_linear_interpolation(ftdz, zoneLen, 100.0 - zonePercent)
midZone = 0.0
ftdzBull = ftdz >= ftdz[1]
ftdzColor = ftdzBull ? color.lime : color.red
plot(upperZone, "FTDZ Upper Zone", color=color.new(color.gray, 65))
plot(lowerZone, "FTDZ Lower Zone", color=color.new(color.gray, 65))
plot(midZone, "FTDZ Mid Zone", color=color.new(color.gray, 75))
plot(ftdz, "FTDZ — Main Line", color=ftdzColor, linewidth=3)
//==============================
// ULTIMATE RSI SETTINGS
//==============================
groupRSI = "Ultimate RSI — Signal Line"
rsiLen = input.int(14, "Length", minval=1, group=groupRSI)
rsiSmooth = input.int(14, "Signal Smoothing", minval=1, group=groupRSI)
rsiSrc = input.source(close, "Source", group=groupRSI)
upper = ta.rma(math.max(ta.change(rsiSrc), 0), rsiLen)
lower = ta.rma(-math.min(ta.change(rsiSrc), 0), rsiLen)
rs = lower == 0.0 ? 100.0 :
upper == 0.0 ? 0.0 :
100.0 - (100.0 / (1.0 + upper / lower))
ftdzAbs = ta.highest(math.abs(ftdz), zoneLen)
rsiMapped = ((rs - 50.0) / 50.0) * ftdzAbs
rsiSignal = ta.ema(rsiMapped, rsiSmooth)
plot(rsiSignal, "Ultimate RSI — Signal", color=color.orange, linewidth=3)
//==============================
// ORIGINAL WAVETREND DOT LOGIC
//==============================
groupWT = "Reach Back Wave — ORIGINAL Dot Logic"
n1 = input.int(10, "WT Channel Length", minval=1, group=groupWT)
n2 = input.int(21, "WT Average Length", minval=1, group=groupWT)
// These two options reproduce the original script's default behavior.
// Original defaults: TRUE / TRUE.
salesOnlyOB = input.bool(true, "Only Red Dots in Overbought", group=groupWT)
buysOnlyOS = input.bool(true, "Only Blue Dots in Oversold", group=groupWT)
nsc = input.float(53.0, "Overbought Level", minval=0.0, group=groupWT)
nsv = input.float(-53.0, "Oversold Level", maxval=0.0, group=groupWT)
showDots = input.bool(true, "Show Blue/Red Dots", group=groupWT)
// Original WaveTrend engine:
// ap = hlc3
// esa = ema(ap, n1)
// d = ema(abs(ap - esa), n1)
// ci = (ap - esa) / (0.015 * d)
// tci = ema(ci, n2)
// wt1 = tci
// wt2 = sma(wt1, 4)
ap = hlc3
esa = ta.ema(ap, n1)
d = ta.ema(math.abs(ap - esa), n1)
ci = d != 0.0 ? (ap - esa) / (0.015 * d) : 0.0
wt1 = ta.ema(ci, n2)
wt2 = ta.sma(wt1, 4)
// EXACT ORIGINAL DOT CONDITIONS:
//
// Red:
// crossunder(wt1, wt2) AND wt1 >= nsc
// OR all bearish crosses when the OB-only filter is disabled.
//
// Blue:
// crossover(wt1, wt2) AND wt1 <= nsv
// OR all bullish crosses when the OS-only filter is disabled.
redDot = salesOnlyOB ? ta.crossunder(wt1, wt2) and wt1 >= nsc : ta.crossunder(wt1, wt2)
blueDot = buysOnlyOS ? ta.crossover(wt1, wt2) and wt1 <= nsv : ta.crossover(wt1, wt2)
// Keep the RBI panel clean. The WaveTrend itself is NOT plotted.
// Only the filtered timing dots are shown.
plotshape(showDots and blueDot,
title="RBI Blue Dot",
style=shape.circle,
location=location.bottom,
color=color.blue,
size=size.tiny)
plotshape(showDots and redDot,
title="RBI Red Dot",
style=shape.circle,
location=location.top,
color=color.red,
size=size.tiny)
//==============================
// ALERTS
//==============================
alertcondition(blueDot,
title="RBI Blue Dot",
message="RBI — Reach Back Index: BLUE WaveTrend dot printed.")
alertcondition(redDot,
title="RBI Red Dot",
message="RBI — Reach Back Index: RED WaveTrend dot printed.")
alertcondition(blueDot or redDot,
title="RBI WaveTrend Dot",
message="RBI — Reach Back Index: WaveTrend timing dot printed.")