Sniper Akshita Pro - Dual Entry

drakash98 · study · 546 行 · 点赞 61 · TradingView 原页

本页源码来自 TradingView 公开发布的开源脚本,版权归原作者所有, 请遵循其原始许可(Pine 脚本常见 CC BY-NC-SA / MPL-2.0 / MIT)。 本项目仅用于研究检索与许可范围内的移植。

Pine Script

//@version=6
indicator("Sniper Akshita Pro - Dual Entry", overlay=true,
     max_boxes_count=20, max_lines_count=100, max_labels_count=100)
 
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// INPUTS
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
groupRange = "01. Opening Range"
rangeSession = input.session("0330-0430", "Opening 1H Range", group=groupRange)
sessionTZ    = input.string("Asia/Kolkata", "Timezone", group=groupRange)
 
groupSetup = "02. 5M Setup"
atrLen      = input.int(14, "ATR Length", group=groupSetup)
dispATR     = input.float(0.60, "Displacement Body ATR", step=0.05, group=groupSetup)
bodyPctMin  = input.float(0.60, "Minimum Body %", step=0.05, group=groupSetup)
mssLookback = input.int(5, "MSS Lookback", minval=2, group=groupSetup)
confirmBars = input.int(12, "Bars After 2nd Sweep", minval=1, group=groupSetup)
 
groupFVG = "03. Primary FVG"
fvgScanBars = input.int(3, "FVG Scan Bars", minval=1, maxval=8, group=groupFVG)
minFvgATR   = input.float(0.05, "Minimum FVG ATR", step=0.01, group=groupFVG)
 
groupDelta = "04. Delta"
deltaLen5  = input.int(20, "5M Delta Average", group=groupDelta)
deltaMult5 = input.float(1.00, "5M Delta Strength", step=0.10, group=groupDelta)
deltaLen1  = input.int(20, "1M Delta Average", group=groupDelta)
deltaMult1 = input.float(0.80, "1M Delta Strength", step=0.10, group=groupDelta)
 
groupVisual = "05. Display"
showRange    = input.bool(true, "Opening Range", group=groupVisual)
showSweeps   = input.bool(true, "Fakeout", group=groupVisual)
showBreakout = input.bool(true, "Breakout", group=groupVisual)
showFVG      = input.bool(true, "Primary FVG", group=groupVisual)
show1M       = input.bool(true, "1M Entry", group=groupVisual)
show5M       = input.bool(true, "5M Entry", group=groupVisual)
 
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// 5 MINUTE ENGINE
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
f_engine5m() =>
    atr = ta.atr(atrLen)
 
    candleRange = math.max(high - low, syminfo.mintick)
    body = math.abs(close - open)
    bodyPct = body / candleRange
 
    pressure = ((close - low) - (high - close)) / candleRange
    delta = volume * pressure
    deltaAvg = ta.sma(math.abs(delta), deltaLen5)
 
    bullDelta = delta > 0 and math.abs(delta) >= deltaAvg * deltaMult5
    bearDelta = delta < 0 and math.abs(delta) >= deltaAvg * deltaMult5
 
    inRange = not na(time(timeframe.period, rangeSession, sessionTZ))
    startRange = inRange and not inRange[1]
 
    var float rHigh = na
    var float rLow = na
 
    var bool highSwept = false
    var bool lowSwept = false
 
    var int candidateDir = 0
    var int secondSweepBar = na
 
    var int direction = 0
    var int confirmationBar = na
    var int setupID = 0
 
    var float candidateTop = na
    var float candidateBottom = na
    var float candidateMid = na
 
    var float primaryTop = na
    var float primaryBottom = na
    var bool primaryReady = false
 
    var bool used5 = false
 
    if startRange
        rHigh := high
        rLow := low
 
        highSwept := false
        lowSwept := false
 
        candidateDir := 0
        secondSweepBar := na
 
        direction := 0
        confirmationBar := na
 
        candidateTop := na
        candidateBottom := na
        candidateMid := na
 
        primaryTop := na
        primaryBottom := na
        primaryReady := false
 
        used5 := false
 
    else if inRange
        rHigh := math.max(nz(rHigh, high), high)
        rLow := math.min(nz(rLow, low), low)
 
    rangeReady = not inRange and not na(rHigh) and not na(rLow)
 
    highSweep = rangeReady and high > rHigh and close < rHigh
    lowSweep  = rangeReady and low < rLow and close > rLow
 
    oldHigh = highSwept
    oldLow  = lowSwept
 
    // High swept first, then low swept = possible LONG reversal
    if lowSweep and oldHigh
        candidateDir := 1
        secondSweepBar := bar_index
 
    // Low swept first, then high swept = possible SHORT reversal
    if highSweep and oldLow
        candidateDir := -1
        secondSweepBar := bar_index
 
    if highSweep
        highSwept := true
 
    if lowSweep
        lowSwept := true
 
    bullDisp =
         close > open and
         body >= atr * dispATR and
         bodyPct >= bodyPctMin
 
    bearDisp =
         close < open and
         body >= atr * dispATR and
         bodyPct >= bodyPctMin
 
    priorHigh = ta.highest(high[1], mssLookback)
    priorLow  = ta.lowest(low[1], mssLookback)
 
    bullMSS = close > priorHigh
    bearMSS = close < priorLow
 
    barsAfterSweep = not na(secondSweepBar) ? bar_index - secondSweepBar : 9999
 
    validWindow =
         barsAfterSweep >= 0 and
         barsAfterSweep <= confirmBars
 
    bullConfirm =
         candidateDir == 1 and
         validWindow and
         bullDisp and
         bullMSS and
         bullDelta
 
    bearConfirm =
         candidateDir == -1 and
         validWindow and
         bearDisp and
         bearMSS and
         bearDelta
 
    if bullConfirm
        direction := 1
        confirmationBar := bar_index
        setupID += 1
 
        candidateTop := na
        candidateBottom := na
        candidateMid := na
 
        primaryTop := na
        primaryBottom := na
        primaryReady := false
        used5 := false
 
    if bearConfirm
        direction := -1
        confirmationBar := bar_index
        setupID += 1
 
        candidateTop := na
        candidateBottom := na
        candidateMid := na
 
        primaryTop := na
        primaryBottom := na
        primaryReady := false
        used5 := false
 
    bullGap = low - high[2]
    bearGap = low[2] - high
 
    bullFVG =
         low > high[2] and
         bullGap >= atr * minFvgATR
 
    bearFVG =
         high < low[2] and
         bearGap >= atr * minFvgATR
 
    scanning =
         not na(confirmationBar) and
         bar_index >= confirmationBar and
         bar_index - confirmationBar <= fvgScanBars
 
    // Bullish move: choose deepest/lower valid FVG
    if scanning and direction == 1 and bullFVG
        tempBottom = high[2]
        tempTop = low
        tempMid = (tempTop + tempBottom) / 2
 
        if na(candidateMid) or tempMid < candidateMid
            candidateTop := tempTop
            candidateBottom := tempBottom
            candidateMid := tempMid
 
    // Bearish move: choose highest valid FVG
    if scanning and direction == -1 and bearFVG
        tempTop = low[2]
        tempBottom = high
        tempMid = (tempTop + tempBottom) / 2
 
        if na(candidateMid) or tempMid > candidateMid
            candidateTop := tempTop
            candidateBottom := tempBottom
            candidateMid := tempMid
 
    lockPrimary =
         not na(confirmationBar) and
         bar_index - confirmationBar >= fvgScanBars and
         not primaryReady
 
    if lockPrimary and not na(candidateMid)
        primaryTop := candidateTop
        primaryBottom := candidateBottom
        primaryReady := true
 
    primaryMid =
         primaryReady ?
         (primaryTop + primaryBottom) / 2 :
         na
 
    bullRetest =
         primaryReady and
         direction == 1 and
         low <= primaryTop and
         high >= primaryBottom
 
    bearRetest =
         primaryReady and
         direction == -1 and
         high >= primaryBottom and
         low <= primaryTop
 
    buy5 =
         not used5 and
         bullRetest and
         close > primaryMid and
         close > open and
         bullDelta
 
    sell5 =
         not used5 and
         bearRetest and
         close < primaryMid and
         close < open and
         bearDelta
 
    if buy5 or sell5
        used5 := true
 
    [
        rHigh,
        rLow,
        highSweep,
        lowSweep,
        bullConfirm,
        bearConfirm,
        direction,
        primaryTop,
        primaryBottom,
        primaryReady,
        setupID,
        buy5,
        sell5
    ]
 
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// GET 5M DATA
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
[
    rangeHigh5,
    rangeLow5,
    highSweepRaw,
    lowSweepRaw,
    bullBreakRaw,
    bearBreakRaw,
    direction5,
    fvgTop5,
    fvgBottom5,
    fvgReady5,
    setupID5,
    buy5Raw,
    sell5Raw
] = request.security(
    syminfo.tickerid,
    "5",
    f_engine5m(),
    gaps=barmerge.gaps_off,
    lookahead=barmerge.lookahead_off
)
 
// Make 5M events appear only once
highSweep5 = highSweepRaw and not highSweepRaw[1]
lowSweep5  = lowSweepRaw and not lowSweepRaw[1]
 
bullBreak5 = bullBreakRaw and not bullBreakRaw[1]
bearBreak5 = bearBreakRaw and not bearBreakRaw[1]
 
buy5Signal  = buy5Raw and not buy5Raw[1]
sell5Signal = sell5Raw and not sell5Raw[1]
 
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// 1 MINUTE ENTRY CONFIRMATION
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
range1 = math.max(high - low, syminfo.mintick)
 
pressure1 =
     ((close - low) - (high - close)) /
     range1
 
delta1 = volume * pressure1
 
deltaAvg1 =
     ta.sma(math.abs(delta1), deltaLen1)
 
bullDelta1 =
     delta1 > 0 and
     math.abs(delta1) >= deltaAvg1 * deltaMult1
 
bearDelta1 =
     delta1 < 0 and
     math.abs(delta1) >= deltaAvg1 * deltaMult1
 
fvgMid5 =
     fvgReady5 ?
     (fvgTop5 + fvgBottom5) / 2 :
     na
 
touchLong1 =
     fvgReady5 and
     direction5 == 1 and
     low <= fvgTop5 and
     high >= fvgBottom5
 
touchShort1 =
     fvgReady5 and
     direction5 == -1 and
     high >= fvgBottom5 and
     low <= fvgTop5
 
bullReject1 =
     touchLong1 and
     close > fvgMid5 and
     close > open and
     bullDelta1
 
bearReject1 =
     touchShort1 and
     close < fvgMid5 and
     close < open and
     bearDelta1
 
var int lastBuy1Setup = na
var int lastSell1Setup = na
 
buy1Signal =
     bullReject1 and
     (na(lastBuy1Setup) or setupID5 != lastBuy1Setup)
 
sell1Signal =
     bearReject1 and
     (na(lastSell1Setup) or setupID5 != lastSell1Setup)
 
if buy1Signal
    lastBuy1Setup := setupID5
 
if sell1Signal
    lastSell1Setup := setupID5
 
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// PROFESSIONAL VISUALS
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
plot(
     showRange ? rangeHigh5 : na,
     "Opening Range High",
     color=color.new(color.gray, 15),
     linewidth=1,
     style=plot.style_linebr
)
 
plot(
     showRange ? rangeLow5 : na,
     "Opening Range Low",
     color=color.new(color.gray, 15),
     linewidth=1,
     style=plot.style_linebr
)
 
plot(
     showFVG and fvgReady5 ? fvgTop5 : na,
     "Primary FVG Top",
     color=color.new(color.silver, 25),
     linewidth=1,
     style=plot.style_linebr
)
 
plot(
     showFVG and fvgReady5 ? fvgBottom5 : na,
     "Primary FVG Bottom",
     color=color.new(color.silver, 25),
     linewidth=1,
     style=plot.style_linebr
)
 
plotshape(
     showSweeps and highSweep5,
     title="High Fakeout",
     style=shape.circle,
     location=location.abovebar,
     size=size.tiny,
     color=color.new(color.red, 10)
)
 
plotshape(
     showSweeps and lowSweep5,
     title="Low Fakeout",
     style=shape.circle,
     location=location.belowbar,
     size=size.tiny,
     color=color.new(color.teal, 10)
)
 
plotshape(
     showBreakout and bullBreak5,
     title="Bull Breakout",
     text="BO",
     style=shape.labelup,
     location=location.belowbar,
     size=size.tiny,
     color=color.new(color.teal, 20),
     textcolor=color.white
)
 
plotshape(
     showBreakout and bearBreak5,
     title="Bear Breakout",
     text="BO",
     style=shape.labeldown,
     location=location.abovebar,
     size=size.tiny,
     color=color.new(color.red, 20),
     textcolor=color.white
)
 
plotshape(
     show1M and buy1Signal,
     title="1M Buy",
     text="1B",
     style=shape.labelup,
     location=location.belowbar,
     size=size.tiny,
     color=color.new(color.teal, 0),
     textcolor=color.white
)
 
plotshape(
     show1M and sell1Signal,
     title="1M Sell",
     text="1S",
     style=shape.labeldown,
     location=location.abovebar,
     size=size.tiny,
     color=color.new(color.red, 0),
     textcolor=color.white
)
 
plotshape(
     show5M and buy5Signal,
     title="5M Buy",
     text="5B",
     style=shape.labelup,
     location=location.belowbar,
     size=size.small,
     color=color.new(color.teal, 0),
     textcolor=color.white
)
 
plotshape(
     show5M and sell5Signal,
     title="5M Sell",
     text="5S",
     style=shape.labeldown,
     location=location.abovebar,
     size=size.small,
     color=color.new(color.red, 0),
     textcolor=color.white
)
 
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
// ALERTS
//━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
alertcondition(
     buy1Signal,
     "Sniper Akshita 1M BUY",
     "1M BUY: 5M setup + Primary FVG retest + 1M bullish delta confirmation."
)
 
alertcondition(
     sell1Signal,
     "Sniper Akshita 1M SELL",
     "1M SELL: 5M setup + Primary FVG retest + 1M bearish delta confirmation."
)
 
alertcondition(
     buy5Signal,
     "Sniper Akshita 5M BUY",
     "5M BUY: Primary FVG retest confirmed on 5-minute setup."
)
 
alertcondition(
     sell5Signal,
     "Sniper Akshita 5M SELL",
     "5M SELL: Primary FVG retest confirmed on 5-minute setup."
)

← 返回列表